>Gundrilling/ Introduction of Capabilities
Blockwork:
DRO multi-positional gundrilling capabilities:
• Large range machine undertaking 4mm – 32mm bores; drilldepth 1000mm (1.5 tonne maximum weight)
• Mid range machine undertaking 3mm – 32mm bores; drill depth 1000mm (1 tonne maximum weight)
• Small range machine to achieve 1.8mm bores; drill depth 750mm
Other gundrilling machines:
Centreline Drilling:
• Twin spindle 4mm – 30mm bores; 1000mm depth
• Twin spindle 5mm – 20mm bores; 600mm depth
• Single spindle 3mm – 30mm bores; 1000mm depth
• Single spindle 4mm – 30mm bores; 1000mm depth
• Single spindle 4mm – 30mm bores; 1500mm depth
• Single spindle 4mm – 30mm bores; 1500mm depth
Small Holes:
• Twin spindle 1.8mm – 4mm; 500mm depth
• Twin spindle 1.8mm – 4mm; 500mm depth
• Single spindle 1.8mm – 4mm; 250mm depth
• Single spindle 1.8mm – 4mm; 250mm depth |
|
>Inspection Facilities
Within a fully temperature controlled facility,
Perfect Bore has:
• Bore Sizing & Geometry Measurement: Mechanical,
air & electronic gauging to measure accuracy within 0.001mm
• Roundness Measurement: Talyrond TR 252 to measure accuracy within 0.0002mm
• Surface Finish Measurement: Surtronic 3+ (20,000 x magnification surface finish analysis software) to measure accuracy 0.01 Ra (0.4 CLA).
• Concentricity & Wall Thickness Measurement: Ultrasonic wall thickness to measure accuracy within 0.050mm |
